Best Prices Book

I was looking for a light, simple, sophisticated watch and this is it. I stopped wearing a watch because I dont like anything on my writs but this watch is very light and easy to wear. It is exactly how it looks in the picture (not sure why others have said it doesnt). The dial is a bit on the small side. Understated elegance.

I just got done making my first dovetailed drawer, and the jig worked great. Two things that could be better: 1) The aluminum top jig was slightly bowed. This just meant I needed some downpressure on the router. I'll try to flatten it later. 2) The adjustable bit depth gauge should have a brass or aluminum top instead of plastic. The plastic allows the edge of the bit to sink in a little, making me uncertain if the depth is exact.This jig is good and a good value.

My wife got this for me for Wedding/Christmas gift and i loved it. The box it came in was very nice. It came with sparse instructions very little in English. Setting the watch is tricky when you have to set it at 6 o'clock to set the day and month (for the purpose of not damaging the watch) and then set the time and if your lucky you have set it correctly on am or pm. It was also tricky to manually wind because of the stand offs next to the winder but It kept accurate time except when it locked up several times at 3:15 am or pm. I was very disappointed i really liked that watch and it looked great with my collection but we had to return it.

i paid big money for this thing thinking it wss a plastic welder all it ii is a hot gun mith 2 tips that should sell for 50$ i was ripped off!!!!, dont you be. ps it is made in romania,???

The case is nice, sort of "neoprene" feel to it. All the LightWedge cases fit snugly, so sometimes our kids need help to put them in the case. The emblem was actually embroidered on and not just a silk screen, so that was nice to see.

Oh my goodness this drill is super quiet and smooth. This is the drill you see in the movies when a thief has to be super quiet when drilling holes!! This is the quietest and smoothest power tool I ever used, corded or cordless. If that has anything to say about the quality, then this drill is the best. We took the angle head off and use it for mixing mud and with the bigger holes saws. We have a few of Milwaukee's 28 volts tools and they seem to be of a much higher quality than the 18 & 12 volt tools. Yes, the keyed chuck is a hassle but that is such a minor thing. If you need a big powerful drill and can break loose with the cash then I would buy this tool over any other brand.

REVISED REVIEW AND RATING: This product was good while it lasted....less than 3months. Yep. I purchased in early December of last year, and the motor burned out on February 28th. I was very careful with how I used this product. I made sure I never filled to capacity and I never let the motor run continuously. Only once, did I run the manufacturer's recommended 8 minutes to make hot soup and the soup was lukewarm...definitely not hot. Buying this product is like putting your 200 bucks down the toilet. Unfortunately, that's the truth. I used this Healthmaster everyday to make smoothies. Yesterday as I was using, the motor started sounding funny and after a few seconds it was smoking and giving off a burning electrical odor and tripping the fuse box. No warning. It was working on one day and kaput the next. It's gone. I understand this is a Jack Lalaine product. I wish I had known before purchasing and just popped for a VitaMix. Previously, I purchased a juicer by him. That was poorly constructed, too and that motor lasted about 4 months. Also, the healthmaster is a monstrous and unattractive machine. As a matter of fact, the entire unit "looks" cheap. Important components of this machine are made of (rust waiting to happen) untreated cast iron. It takes up a lot of counter space. This is a expensive piece of crap. This product cannot stand up to daily usage. In the case of the juicer, I ended purchasing Breville's Ikon Juice Fountain,(it's a great juicer). In this case,…

looking for the top of the line plastic welder? This is it.Works realy good heats up quik.comes with real nice caring case and enough welding rods to get started welding and two tips. Just realy love it! would buy another.

I am piano professor whose uses the piano everyday. My students come in different sizes and so do their music scores. After the (desk) lamp I'd used for the piano broke, I thought that it was time to invest into something nicer, more convenient, and saves the space on the piano. After reading different reviews on this product from other websites and reviews on other models of House of Troy piano lamps, I decided that I would give it a try.The lamp I received had a VERY wobbly head that it swings and rattles. When that might have been just for that particular item, the lamp really would not work for me because of other reasons.1. The "clam" part was too small to clip onto my music stand. (Mine is thicker.)2. There is no height adjustment. The curve you see on the picture here is NOT for adjusting. Therefore, if you have a shorter music stand, (which my Mason & Hamlin does,) or if you have a bigger (taller) music score, it would not fit under the light. Even if it does, you would have trouble turning pages.While it is not cheap to begin with, it is a shame for Amazon to carry such a lousy product at such a steep price. So after coming out of the box for five minutes, the lamp went right back in and is heading back to Amazon, at their cost.

I purchased the Carvewright system, along with the bit set, from Amazon. Let me first say Amazon was perfect in every way. However, I never even got a chance to complete a single project before the machine died. The front roller switch was defective from the factory causing error after error. Each time I started the machine I had to wiggle the wire feeding the roller, per another Carvewright owners suggestion, which did temporarily fix the problem but I should not have to do that with a new machine. After my second attempt at carving a sign the gear wheel stripped and that was the end of that. I called the Carvewright people the next morning and spent about 2 hours on the phone before we identified the problem. The man was very nice and helful but in the end a new gear box was needed and I was the one, I guess, who was supposed to do all the work to install it. He stated it would arrive in about a week or so. I needed it quicker than that in order to work on some signs for my daughters 4H group so I requested they send it overnight. After much pondering they stated I would need to pay for the shipping. At that point I simply told them the machine was on its way back and thanks for nothing.I can see the excitment about what this machine potentially was supposed to do, however, I found it way to breakable and can see that even if I did fix these problems the potential for more problems was around the next corner. Also, unless you are willing to purchase the extra bit set for $300…

Not quite enough light. Instead, I bought the 19" to try out. it is great with the 19". Make sure you take into account the length of your music book. It is at least 17-18" on mine.

Flexible LED Magnifier Desk Lamp for Books, Ebook Readers, Kindle, Nook, Sony Digital Reader This is a very well designed lamp. The 3 brightness levels are a plus. Very fast delivery. I wish it came in other colors.

I purchased the Barska Biometric safe because I needed a safe with easier access. My original safe was based on a key. It was a challenge to find a location for the key that would allow easy access quickly. In addition, how does one open the safe in the dark. This safe is much better. The safe is large enough to fit several weapons, ammo and magazines. The safe is sturdy and well built. The only drawback is the actual size. It's to big to fit into a standard size night stand. The door swings out to your right. It might have been better if the door swung down or up. Access would be easier. You either have to put it in a closet, mount it in a wall or under a bed.In terms of registering of fingers, you can register several sets of fingers to get into the safe. There is also a back up key system behind the logo. The biometric system is easy to setup and easy to use. The instructions are on a sturdy cardboard which can be stored for later use. Once the fingers are registered, you can test to see how quickly access can be provided. I was very impressed with the access. The finger portal lights up where you put your finger. Especially good for the dark. It takes approximately 3 to 5 seconds to gain access to the box. The count is from the point of pushing the button to placing finger on the biometric scanner to accessing the weapon. Very impressive.

I HAVE BEEN DOING DRYWALL FOR 21 YEARS AND WISH I WOULD OF BOUGHT THIS 21 YEARS AGO, WHAT A FOOL I WAS. THIS IS THE BEST PARTNER I EVER HAD, COMES TO WORK EVERYDAY, NEVER GETS TIRED AND NEVER EVER COMPLAINS ABOUT THE PAY. I USE TO BE SKEPTICAL ABOUT DRYWALL LIFTS BUT NOW THAT I RECENTLY PURCHASED ONE IT IS WELL WORTH THE INVESTMENT AND WILL HIGHLY RECOMMEND THIS TO ANYONE.

This is a perfect piano lamp. It fits over the music backing on my piano and has screws to tighten it. It doesn't come with a bulb, so be sure to order one too (see comments for a link to a bulb that fits sold by Amazon.) This lamp is simple, but classic. It doesn't draw attention to itself, but provides good lighting for playing. Free shipping for Amazon Prime members!